Attention A T users. To access the menus on this page please perform the following steps. 1. Please switch auto forms mode to off. 2. Hit enter to expand a main menu option (Health, Benefits, etc). 3. To enter and activate the submenu links, hit the down arrow. You will now be able to tab or arrow up or down through the submenu options to access/activate the submenu links.

VA Technical Reference Model v 24.4

Gerber OMEGA
Gerber OMEGA Technology

General InformationGeneral Information help

Technologies must be operated and maintained in accordance with Federal and Department security and privacy policies and guidelines. More information on the proper use of the TRM can be found on the TRM Proper Use Tab/Section.

Website: Go to site
Description: Gerber OMEGA is a layout, design, output and conversion solution created specifically for use to create professional graphics such as signs, labels, decals and display graphics. This product supports vinyl cutting, printing and routing through the use of devices such as Gerber vinyl cutters, the Gerber EDGE family of thermal printers, as well as Gerber routers and flatbed cutters.

Multiple editions are available for this technology: Gerber OMEGA CP (Cut/Print), OMEGA CS (Cut Solution), OMEGA Layout Station, and OMEGA Plot Station. This assessment covers all available editions.
Technology/Standard Usage Requirements: Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.
Section 508 Information: This technology qualifies for a legally-defined Exception (Back Office) as determined by the Section 508 Office and will not need a 508 assessment prior to being available in the TRM. For additional information or assistance regarding Section 508, please contact the Section 508 Office at
Decision: View Decisions

Decision Source: TRM Mgmt Group
Decision Process: One-VA TRM v24.4
Decision Date: 04/19/2024 at 03:49:23 UTC
Aliases: Gerber OMEGA CP (Cut/Print); OMEGA CS (Cut Solution); OMEGA Layout Station; OMEGA Plot Station
Introduced By: TRM Request
Vendor Name: Gerber Technology
- The information contained on this page is accurate as of the Decision Date (04/19/2024 at 03:49:23 UTC).