Attention A T users. To access the menus on this page please perform the following steps. 1. Please switch auto forms mode to off. 2. Hit enter to expand a main menu option (Health, Benefits, etc). 3. To enter and activate the submenu links, hit the down arrow. You will now be able to tab or arrow up or down through the submenu options to access/activate the submenu links.

VA Technical Reference Model v 20.6

Point-to-Point Protocol (PPP)
Point-to-Point Protocol (PPP) Standard or Specification

General InformationGeneral Information help

Technologies must be operated and maintained in accordance with Federal and Department security and privacy policies and guidelines. More information on the proper use of the TRM can be found on the TRM Proper Use Tab/Section.

Website: Go to site
Description: Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol datagrams over point-to-point links. PPP defines an extensible Link Control Protocol (LCP) to establish, configure, and test the data-link connection and a family of Network Control Protocols (NCPs) that establish and configure different network-layer protocols. PPP can provide connection authentication, transmission encryption, and compression capabilities.
Technology/Standard Usage Requirements: Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.
Section 508 Information:
Decision: View Decisions

Decision Source: TRM Mgmt Group
Decision Process: One-VA TRM v20.2
Decision Date: 02/24/2020
Aliases: PPP Vendor Extensions
Introduced By: TRMSP
Standards Body: Internet Engineering Task Force (IETF)
- The information contained on this page is accurate as of the Decision Date (02/24/2020).