Attention A T users. To access the menus on this page please perform the following steps. 1. Please switch auto forms mode to off. 2. Hit enter to expand a main menu option (Health, Benefits, etc). 3. To enter and activate the submenu links, hit the down arrow. You will now be able to tab or arrow up or down through the submenu options to access/activate the submenu links.

VA Technical Reference Model v 24.7

Wireless AutoSwitch XPV
Wireless AutoSwitch XPV Technology

General InformationGeneral Information help

Technologies must be operated and maintained in accordance with Federal and Department security and privacy policies and guidelines. More information on the proper use of the TRM can be found on the TRM Proper Use Tab/Section.

Website: Go to site
Description: Wireless AutoSwitch is software that automatically disables wireless cards upon connection to a Local Area Network (LAN) (hard wire) connection and will re-enable the wireless card when there is no LAN connection available.

For offices that are wireless security conscious this application makes sure the laptop`s wireless card is off when the user is wired into your network, preventing bridged connections and preventing someone from the outside hacking the network through a laptop`s wireless card.

Wireless AutoSwitch XPV adds the ability to disable multiple WiFi cards, Modems, Bluetooth devices, and 3G/Broadband cards when there is a LAN connection. It also has an option to release the Dynamic Host Configuration Protocol (DHCP) address before the wireless card is disabled. Works on Windows 10 , Windows 7, Windows 8.1, Vista and XP.
Technology/Standard Usage Requirements: Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.
Section 508 Information: This technology has not been assessed by the Section 508 Office. The Implementer of this technology has the responsibility to ensure the version deployed is 508-compliant. Section 508 compliance may be reviewed by the Section 508 Office and appropriate remedial action required if necessary. For additional information or assistance regarding Section 508, please contact the Section 508 Office at Section508@va.gov.
Decision: View Decisions

Decision Source: TRM Mgmt Group
Decision Process: One-VA TRM v19.4
Decision Date: 04/29/2019 at 14:55:10 UTC
Introduced By: TRM Request
Vendor Name: Sase Sham, Inc.
- The information contained on this page is accurate as of the Decision Date (04/29/2019 at 14:55:10 UTC).