|
| [1] | This product includes a Bluetooth capability. If that capability is leveraged by the implementer, the implementer must conform to the Bluetooth standard.
The VA and authorized users must be aware that using this application does not make the effected device FIPS 140-2 compliant and additional measures should be taken to ensure compliance. Ensure the use of a FIPS 140-2 validated cryptographic module to secure VA sensitive data in applications and devices that use Bluetooth.
The following are measures to mitigate security attack vectors for Bluetooth:
- Bluetooth is to be enabled only when required.
- Enable Bluetooth discovery only when necessary, and disable discovery when finished.
- Avoid entering link keys or PINs when unexpectedly prompted to do so.
- Remove paired devices when not in use.
- Regularly update firmware on Bluetooth-enabled devices.
Security Mode 4, Level 4 must be used, with Bluetooth BR/EDR/HS, as it requires Secure Connections, which uses authenticated pairing and encryption using 128-bit strength keys generated using FIPS-approved Advanced Encryption Standard (AES) encryption as required per VA Handbook 6500 AC-18.
Security Mode 1 Level 4 requires low energy Secure Connections authenticated pairing and encryption using AES-CMAC and P-256 elliptic curve. NIST considers this the most secure of these modes/levels and strongly recommends its use for all low energy connections in 4.2. For 4.0 and 4.1 low energy connections, NIST strongly recommends using Security Mode 1 Level 3 as it requires authenticated pairing and encryption although not as strong (not using P-256 elliptical curve) encryption as Level 4. Security Mode 1 Level 1 is the least secure and should never be used. |
|
| [2] | This product includes a Bluetooth capability. If that capability is leveraged, the implementer must conform to the Bluetooth Standard. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. |
|
| [3] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. |
|
| [4] | Technology must remain patched and operated in accordance with Federal and Department security policies and guidelines in order to mitigate known and future security vulnerabilities. |
|
| [5] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). |
|
| [6] | Due to potential information security risks, cloud based technologies may not be used without the approval of the Enterprise Cloud Solution Office (ECSO). This body is in part responsible for ensuring organizational information, Personally Identifiable Information (PII), Protected Health Information (PHI), and VA sensitive data are not compromised. (Ref: VA Directive 6004, VA Directive 6517, VA Directive 6513 and VA Directive 6102). |
|
| [7] | New installations or major expansions of this technology that transmit data over the VA Wide Area Network (WAN) must complete a WAN impact review (contact VA e-mail: [OIT ITOPS SD Engagement Requests]) prior to implementation to ensure proper compliance to VA network design and usage requirements. |
|
| [8] | Users must ensure that Microsoft .NET Framework, Microsoft Internet Explorer (IE), Microsoft Internet Information Services (IIS) and Microsoft Structured Query Language (SQL) Server are implemented with VA-approved baselines. (refer to the ‘Category’ tab under ‘Runtime Dependencies’)
Per the Initial Product Review, users must abide by the following constraints:
- The VA and authorized users must be aware that using this application does not make the effected device FIPS 140-2 compliant and additional measures should be taken to ensure compliance. Ensure the use of a FIPS 140-2 validated cryptographic module to secure VA sensitive data in applications and devices that use Bluetooth.
- Security Mode 4, Level 4 must be used, with Bluetooth BR/EDR/HS, as it requires Secure Connections, which uses authenticated pairing and encryption using 128-bit strength keys generated using FIPS-approved Advanced Encryption Standard (AES) encryption as required per VA Handbook 6500 AC-18.
- Security Mode 1 Level 4 requires low energy Secure Connections authenticated pairing and encryption using AES-CMAC and P-256 elliptic curve. NIST considers this the most secure of these modes/levels and strongly recommends its use for all low energy connections in 4.2. For 4.0 and 4.1 low energy connections, NIST strongly recommends using Security Mode 1 Level 3 as it requires authenticated pairing and encryption although not as strong (not using P-256 elliptical curve) encryption as Level 4. Security Mode 1 Level 1 is the least secure and should never be used.
|
|
| [9] | Due to potential information security risks for cloud-based technologies, users should coordinate closely with their facility ISSO for guidance and assistance on cloud products. If further guidance is needed contact the Enterprise Cloud Solution Office (ECSO), which is the body responsible for new software development in and migration of existing systems to the VA Enterprise Cloud (VAEC) and ensuring organizational information, Personally Identifiable Information (PII), Protected Health Information (PHI), and VA sensitive data are not compromised within the VAEC. For information about Software as a Service (SaaS) products or to submit a SaaS product request with the Project Special Forces (SPF) team, please use their online form.
(Ref: VA Directive 6004, VA Directive 6517, VA Directive 6513 and VA Directive 6102). |
|
| [10] | New installations or major expansions of this technology that transmit data over the VA Wide Area Network (WAN) must complete a WAN impact review (yourIT Service Portal:[SNOW Service Requests]) prior to implementation to ensure proper compliance to VA network design and usage requirements. |
|
| [11] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. |
|
| [12] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information Security Officer (ISO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). |
|
| [13] | Due to potential information security risks for cloud-based technologies, users should coordinate closely with their facility ISSO for guidance and assistance on cloud products. If further guidance is needed contact the Enterprise Cloud Solution Office (ECSO), which is the body responsible for new software development in and migration of existing systems to the VA Enterprise Cloud (VAEC) and ensuring organizational information, Personally Identifiable Information (PII), Protected Health Information (PHI), and VA sensitive data are not compromised within the VAEC. For information about Software as a Service (SaaS) products or to submit a SaaS product request with the Project Special Forces (SPF) team, please use their online form.
(Ref: VA Directive 6004, VA Directive 6517, VA Directive 6513 and VA Directive 6102). |
|
| [14] | This product includes a Bluetooth capability. If that capability is leveraged, the implementer must conform to the Bluetooth Standard. All instances of deployment using this technology should be reviewed by the local ISO (Information Security Officer) to ensure compliance with VA Handbook 6500. |
|
| [15] | Due to potential information security risks for cloud-based technologies, users should coordinate closely with their facility ISSO for guidance and assistance on cloud products. If further guidance is needed contact the Enterprise Cloud Solution Office (ECSO), which is the body responsible for new software development in and migration of existing systems to the VA Enterprise Cloud (VAEC) and ensuring organizational information, Personally Identifiable Information (PII), Protected Health Information (PHI), and VA sensitive data are not compromised within the VAEC. For information about Software as a Service (SaaS) products or to submit a SaaS product request with the Project Special Forces (PSF) team, please use their online form.
(Ref: VA Directive 6004, VA Directive 6517, VA Directive 6513 and VA Directive 6102). |
|
| [16] | Due to potential information security risks for cloud-based technologies, users should coordinate closely with their facility ISSO for guidance and assistance on cloud products. If further guidance is needed contact the Enterprise Cloud Solution Office (ECSO), which is the body responsible for new software development in and migration of existing systems to the VA Enterprise Cloud (VAEC) and ensuring organizational information, Personally Identifiable Information (PII), Protected Health Information (PHI), and VA sensitive data are not compromised within the VAEC. For information about Software as a Service (SaaS) products or to submit a SaaS product request with the VA OIT Product Engineering team, please use their online form.
(Ref: VA Directive 6004, VA Directive 6517, VA Directive 6513 and VA Directive 6102). |
|
| [17] | Users must ensure that Microsoft .NET Framework, Microsoft Internet Information Services (IIS), Google Chrome, Firefox, and Microsoft Structured Query Language (SQL) Server are implemented with VA-approved baselines. (refer to the ‘Category’ tab under ‘Runtime Dependencies’) |
|
| [18] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 compliant encryption to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 compliant full disk encryption (FOE) must be implemented on the hard drive where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information System Security Officer (ISSO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). |
|
| [19] | This product includes a Bluetooth capability. If that capability is leveraged, the implementer must conform to the Bluetooth Standard. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with VA Handbook 6500. |
|
| [20] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with VA Handbook 6500. |
|
| [21] | Veterans Affairs (VA) users must ensure VA sensitive data is properly protected in compliance with all VA regulations. All instances of deployment using this technology should be reviewed by the local ISSO (Information System Security Officer) to ensure compliance with both VA Handbook 6500 and VA Directive 6500. |
|
| [22] | Per the May 5th, 2015 memorandum from the VA Chief Information Security Officer (CISO) FIPS 140-2 FIPS 140-2 Validate Full Disk Encryption (FOE) for Data at Rest in Database Management Systems (DBMS) and in accordance with Federal requirements and VA policy, database management must use Federal Information Processing Standards (FIPS) 140-2 or its successor to protect the confidentiality and integrity of VA information at rest at the application level. If FIPS 140-2 encryption at the application level is not technically possible, FIPS 140-2 or 140-3 compliant full disk encryption (FOE) must be implemented on the storage device where the DBMS resides. Appropriate access enforcement and physical security control must also be implemented. All instances of deployment using this technology should be reviewed to ensure compliance with VA Handbook 6500 and National Institute of Standards and Technology (NIST) standards. It is the responsibility of the system owner to work with the local CIO (or designee) and Information System Security Officer (ISSO) to ensure that a compliant DBMS technology is selected and that if needed, mitigating controls are in place and documented in a System Security Plan (SSP). By September 22, 2026, all FIPS 140-2 certificate validations will be placed on the Historical List, please refer to FIPS Transition Effort for further guidance and timeline of changes. |
|
| [23] | Due to potential information security risks for cloud-based technologies, users should coordinate closely with their facility ISSO for guidance and assistance on cloud products. If further guidance is needed contact the Enterprise Cloud Solution Office (ECSO), which is the body responsible for new software development in and migration of existing systems to the VA Enterprise Cloud (VAEC) and ensuring organizational information, Personally Identifiable Information (PII), Protected Health Information (PHI), and VA sensitive data are not compromised within the VAEC. For information about Software as a Service (SaaS) products or to submit a SaaS product request, visit the Product Marketplace.
(Ref: VA Directive 6004, VA Directive 6517, VA Directive 6513 and VA Directive 6102). |
