Attention A T users. To access the menus on this page please perform the following steps. 1. Please switch auto forms mode to off. 2. Hit enter to expand a main menu option (Health, Benefits, etc). 3. To enter and activate the submenu links, hit the down arrow. You will now be able to tab or arrow up or down through the submenu options to access/activate the submenu links.

VA Technical Reference Model v 24.4

Secure Remote Access with Layer 2 Tunneling Protocol (L2TP)
Secure Remote Access with Layer 2 Tunneling Protocol (L2TP) Standard or Specification

General InformationGeneral Information help

Technologies must be operated and maintained in accordance with Federal and Department security and privacy policies and guidelines. More information on the proper use of the TRM can be found on the TRM Proper Use Tab/Section.

Website: Go to site
Description: Secure Remote Access with Layer 2 tunneling Protocol (L2TP) extends the security characteristics of Internet Protocol Security (IPsec) to remote access users, as they dial-in through the Internet. Layer 2 Tunneling Protocol (L2TP) is a virtual extension of Point to Point Protocol (PPP) across Internet Protocol (IP) network infrastructure. L2TP makes possible for an L2TP access concentrator (LAC) to be near remote clients, while allowing PPP L2TP Network Server (LNS) to be located in enterprise premises. L2TP allows an enterprise to retain control of Remote Authentication Dial-In User Service (RADIUS) data base, which is used to control Authentication, Authorization and Accountability (AAA) of dial-in users. The objective of this document is to extend security characteristics of IPsec to remote access users, as they dial-in through the Internet.
Technology/Standard Usage Requirements: Users must ensure their use of this technology/standard is consistent with VA policies and standards, including, but not limited to, VA Handbooks 6102 and 6500; VA Directives 6004, 6513, and 6517; and National Institute of Standards and Technology (NIST) standards, including Federal Information Processing Standards (FIPS). Users must ensure sensitive data is properly protected in compliance with all VA regulations. Prior to use of this technology, users should check with their supervisor, Information Security Officer (ISO), Facility Chief Information Officer (CIO), or local Office of Information and Technology (OI&T) representative to ensure that all actions are consistent with current VA policies and procedures prior to implementation.
Section 508 Information:
Decision: View Decisions

Decision Source: TRM Mgmt Group
Decision Process: One-VA TRM v23.12
Decision Date: 12/21/2023 at 21:14:01 UTC
Aliases: Secure Remote Access with L2TP
Introduced By: TRMSP
Standards Body: Internet Engineering Task Force (IETF)
- The information contained on this page is accurate as of the Decision Date (12/21/2023 at 21:14:01 UTC).